TITAN aluminium formwork beams
Versatile. Long-lasting. Lightweight.

The aluminium formwork beams are intrinsic to the ISCHEBECK TITAN modular system and can be used in many ways. Whether as primary and transverse beams in conventional slab formwork, as additions to traditional scaffolds or as bridging beams with a high load-carrying capacity, the features of our aluminium formwork beams are impressive.

Advantages

High-strength aluminium
High load-carrying capacity for a low self-weight
Robust and weather-resistant
Lengths to suit the needs of contractors
With nailing batten
Calculations to EN 1999-1-1 (Eurocode 9)

All TITAN aluminium formwork beams

Alu-Schalungsträger
TITAN 220

extra-starkes doppeltes U-Profil
in drei Längen lieferbar (1,30 m, 2,75 m, 11,90 m)
Bauhöhe 220 mm
Gewicht 15 kg/m
zum Abhängen von Arbeitsbühnen und als Gurtung

Aluminium formwork beam
TITAN 220

Heavy-duty twin channel section
Available in three lengths (1.30 m, 2.75 m, 11.90 m)
220 mm deep
Weight 15 kg/m
For use as waling or for supporting working platforms

Alu-Schalungsträger
TITAN 120

mit angeschweißter Kopfplatte
in zwei Längen lieferbar (2,50 m und 3,75 m)
Bauhöhe 120 mm
Gewicht 2,9 kg/m

Aluminium formwork beam
TITAN 120

With welded end plate
Available in two lengths (2.50 and 3.75 m)
120 mm deep
Weight 2.9 kg/m

Alu-Schalungsträger
TITAN 160 H

mit nagelbarer Holzleiste und Multifunktionsnut
in neun Längen lieferbar (von 2,75 m bis 11,90 m)
Bauhöhe 160 mm
Gewicht 6,5 kg/m

Aluminium formwork beam
TITAN 160 H

With integral nailing batten and multipurpose slot
Available in nine lengths (from 2.75 to 11.90 m)
160 mm deep
Weight 6.5 kg/m

Alu-Schalungsträger
TITAN 200

in drei Längen lieferbar (2,50 m, 3,90 m, 4,90 m)
Bauhöhe 200 mm
Gewicht 5,3 kg/m

Aluminium formwork beam
TITAN 200

Available in three lengths (2.50 m, 3.90 m, 4.90 m)
200 mm deep
Weight 5.3 kg/m

Alu-Schalungsträger
TITAN 225

mit doppelter Multifunktionsnut
in neun Längen lieferbar (von 1,50 m bis 9,00 m)
Bauhöhe 225 mm
Gewicht 8,5 kg/m

Aluminium formwork beam
TITAN 225

With two multipurpose slots
Available in nine lengths (from 1.50 to 9.00 m)
225 mm deep
Weight 8.5 kg/m

Überbrückungsträger
TITAN

Typ 2 wie HEB 200, Typ 3 wie HEB 240 – 280
erhöhte Tragfähigkeit durch schubsteife Verbindung von zwei oder drei Trägern TITAN 225 übereinander mit Hilfe der Alu-Trägerkupplung TITAN
wesentlich leichtere Alternative zum Stahlträger
in sechs Trägerlängen lieferbar (von 3,60 m bis 7,20 m)
mit geprüfter Typenstatik

Bridging beams
TITAN

Type 2 comparable to HEB 200, type 3 comparable to HEB 240 – 280
TITAN aluminium beam couplers are used to create shear-resistant connections in a stack of two or three TITAN 225 beams to produce a bridging beam with a higher load-carrying capacity.
The much lighter alternative to a steel beam
Six beam lengths: from 3.60 to 7.20 m
Verified typical calculations

Downloads
for TITAN aluminium formwork beams

More detailed information about our products is available here. In addition to the freely available downloads, many more downloads are available to registered users.